Commercial Floor Coatings That Perform Under Pressure
Forklifts, chemicals, foot traffic, and health inspections. Your commercial floor has to handle all of it. We install polyaspartic, epoxy, and epoxy quartz systems tailored to your facility’s needs.
Get a Commercial EstimateInstallation
After-Hours
Resistance
Chemical Resistant
Marking
Safety Zone Capable
Warranty
15 Years
Built for Commercial Environments
Forklift & Heavy Traffic
Rated for rubber-wheeled and pneumatic-tire forklifts, pallet jacks, and heavy rolling loads.
Chemical Containment
Non-porous surface resists oils, solvents, degreasers, and food-grade chemicals.
Safety Zone Marking
Colored zones for pedestrian lanes, forklift routes, and hazard areas without paint that wears off.
OSHA & Health Compliant
Seamless, antimicrobial surface meets sanitation requirements for food service, medical, and retail.
After-Hours Installation
We work nights and weekends. Your business stays open.
Custom Branding
Match your brand colors. Add logos. Make your facility floor part of your identity.
Polyaspartic vs. Polished Concrete vs. VCT Tile
See how our commercial system stacks up against common alternatives.
Our Polyaspartic System
Feature
Polished Concrete / VCT Tile
Full resistance — oils, solvents, food chemicals
Chemical Resistance
Polished: stains. VCT: degrades with chemicals
Flexible coating absorbs impacts
Impact Resistance
Polished: chips. VCT: dents and tears
Sweep and mop — no waxing or polishing
Maintenance Cost
Polished: periodic re-polishing. VCT: strip and wax monthly
1–2 days, after-hours available
Installation Downtime
Polished: 3–5 days. VCT: 1–2 weeks
140+ colors, safety zones, logos, metallic
Design Options
Limited — polished is gray, VCT is tile patterns
15–20 years
Lifespan
Polished: 10+. VCT: 5–10 years
Yes — no joints, no grout, no seams
Seamless Surface
Polished: joints. VCT: seams between tiles
Chemical Resistance
Our Polyaspartic System
Full resistance — oils, solvents, food chemicals
Polished Concrete / VCT Tile
Polished: stains. VCT: degrades with chemicals
Impact Resistance
Our Polyaspartic System
Flexible coating absorbs impacts
Polished Concrete / VCT Tile
Polished: chips. VCT: dents and tears
Maintenance Cost
Our Polyaspartic System
Sweep and mop — no waxing or polishing
Polished Concrete / VCT Tile
Polished: periodic re-polishing. VCT: strip and wax monthly
Installation Downtime
Our Polyaspartic System
1–2 days, after-hours available
Polished Concrete / VCT Tile
Polished: 3–5 days. VCT: 1–2 weeks
Design Options
Our Polyaspartic System
140+ colors, safety zones, logos, metallic
Polished Concrete / VCT Tile
Limited — polished is gray, VCT is tile patterns
Lifespan
Our Polyaspartic System
15–20 years
Polished Concrete / VCT Tile
Polished: 10+. VCT: 5–10 years
Seamless Surface
Our Polyaspartic System
Yes — no joints, no grout, no seams
Polished Concrete / VCT Tile
Polished: joints. VCT: seams between tiles
7/7
Our Polyaspartic System
VS
0/7
Polished Concrete / VCT Tile
Recent Commercial Projects
Auto Repair Shop — Chandler, AZ
Auto Shop (3,200 sq ft)
Challenge
Active auto shop with 6 bays. Concrete saturated with oil and hydraulic fluid. Owner needed chemical resistance, safety lanes, and zero business days lost.
Solution
Friday close: moved all lifts and equipment. Saturday: diamond ground, applied moisture mitigation primer, pigmented base coat. Sunday: topcoat and safety zone striping for pedestrian lanes and lift areas. Monday morning: open for business.
Result
Oil and brake fluid wipe clean. Safety lanes visible. No business days lost.
Retail Showroom — Scottsdale, AZ
Furniture Showroom (1,800 sq ft)
Challenge
High-end furniture showroom with foot traffic, rolling displays, and a need for a floor that enhances the product, not competes with it. Previous polished concrete was scratched and stained.
Solution
Diamond ground existing polished concrete. Applied metallic pigment in charcoal/silver blend over primer. Two-pass application technique for flowing marble effect. High-gloss polyaspartic topcoat.
Result
Unique marbled floor that catches light and elevates the space. Client reported customers commenting on the floor unprompted.
3-Car Garage — Gilbert, AZ
Residential Garage (720 sq ft)
Challenge
Heavily oil-stained concrete from 15 years of use. Multiple hairline cracks. Previous DIY epoxy kit had peeled in tire parking areas.
Solution
Diamond ground entire surface to remove old epoxy and expose fresh concrete. Filled 12 cracks with flexible polyurea. Applied 100% solids primer, pigmented base coat, full flake broadcast in Saddle Tan blend, and UV-stable clear topcoat.
Result
Homeowner driving on it the next day. Zero peeling at 18-month follow-up.
Pool Deck + Patio — Mesa, AZ
Pool Deck & Patio (1,100 sq ft)
Challenge
Cracked and stained concrete pool deck with surrounding patio. Previous Kool Deck surface was flaking and rough on bare feet. Homeowner wanted seamless, non-slip, and durable.
Solution
Removed all loose Kool Deck material. Diamond ground to profile. Filled expansion joints with flexible polyurea. Applied primer, base coat, fine flake broadcast in Desert Sand blend with anti-slip aggregate, and UV-stable topcoat.
Result
Non-slip texture, comfortable barefoot, and significantly more durable than the old surface.
Failed DIY Repair — Queen Creek, AZ
Residential Garage (500 sq ft)
Challenge
Homeowner applied a big-box epoxy kit 8 months prior. Coating had yellowed, peeled in tire areas, and bubbled in the center. Moisture testing revealed high vapor transmission from the slab.
Solution
Stripped remaining epoxy with aggressive diamond grinding. Applied calcium chloride moisture test — confirmed 8 lbs/1000 sq ft (above threshold). Applied moisture mitigation primer, 24-hour cure, then standard 4-layer polyaspartic system.
Result
No peeling, no yellowing, no bubbling at 12-month follow-up. Moisture issue resolved permanently.
Commercial Floor Coating FAQs
Every commercial job is different. Timeline depends on square footage, prep work, and your operational schedule. We’ll scope the project during our site survey and build a custom install plan — most jobs are scheduled after-hours or on weekends so your business stays open.
We spec every floor system to your facility’s requirements — forklift weight, chemical exposure, foot traffic volume, whatever your operation demands. During the site survey we’ll evaluate your use case and recommend the right system thickness, topcoat, and texture.
Yes. Pedestrian lanes, forklift routes, hazard zones, and loading areas. Lines are integral to the coating — not paint on top — so they don’t wear off.
We test every commercial slab for moisture vapor transmission before coating. If levels are high, we apply a moisture mitigation primer first. No guessing.
Get Your Commercial Estimate
Tell us about your facility and we’ll schedule a free site survey.
Share your facility type + square footage
We’ll recommend a system that matches traffic + compliance needs
Get a scoped estimate and clear next steps